TEK2 tek 16CTRL v3 but with endless button change

Yes, iirc the buttons weren't programmed, they arent programmed on the 64CTRL either. Should they just work the same way as the endless knobs do?

i want to en- and disable some FX depending on the bank, so i could use different CCs for every bank

Gotcha, I can do that in an update for sure!

Can they be notes or they have to be CCs?

thats very cool! I am not sure about the notes. i guess it should work as well. Its for the Djay app on iPadOS. Thanks for your help, i just entered this world and need some time to find everything out 😉

Cool, I'll make a reminder to update it!

We're kind of moving offices at the moment so not sure when I get to it, but it should be a quick update when I do!

thanks again, hope the new office is great 😄

i thought about this a little more. While i still would use the profile as i described above, i have a similar layout but with a little different usecase. I'd like to use the top row of switches to change the banks, i could use the bottom row for functions, i dont need all banks. So i would use the top row to switch between the different uses, and the f1-f4, the endless encoders and buttons would be individual commands. I guess this is also possible?

so i thought i go on a little and tried my luck with some vibe code. it worked out quite good, the basic functionality is here. Only the LEDs on the encoders are weird. the two rightmost LEDs are lit, when pushing the encoders they go white. slowly turning them does dim the LEDs and back to bright. Gemini insisted that these two LEDs indicate the Page i am on and that i should set the page count of the module to 1. I could not find a setting of that. also i think the AI is wrong here. Any idea where i should look at?

here is the link to the profile: grid-editor://?config-link=TiKi1ssrlTgz3Z91jRxP

and here a video of the behavior

I was trying today to use the 16CTRL v3 profile but instead of 0-127 make it 0-16383.... I somehow got stuck, can someone point out how to achieve that?