[{"name":"OBS Macro Controller","slug":"obs-macro-controller","description":"Use the BU16 module with OBS to switch between scenes.","readme":"","author":"intechstudio","version":"1.2.12","type":"BU16","configs":[{"name":"Page 0","description":"\n

Added Functionality

This configuration profile lets the BU16 behave as a controller for the streaming application named OBS.

Using this configuration will allow you to switch between scenes, turn sources on and off within those scenes and mute/unmute audio sources.

Attention!

For this configuration to work properly, you must also adjust your keyboard hotkey macros within the OBS application as well.

Using it

In normal orientation the first column of elements represent scenes.

The second and third columns represent sources and the LEDs are switched off by default (implying switched off sources as well, but you could change this as you like).

The first two elements of the fourth column are mutes for audio sources.

Elements #11 #13 #14 #15 are blank, indicated by the default blue LED colors. You could configure these as you'd like using the functions found within this profile as a template.

How does it work?

The scene switcher buttons use simple keyboard messages from alt+shift+0 to alt+shift+3 to switch between scenes. The LED behavior is made possible by a short for function.

The source buttons are toggles, nested within double if structures, so as to both check the button value and the button state before sending out messages from alt+shift+4 to alt+shift+9 (as of right now this is the limit of my keyboard, but you could come up with your own macros as well, you'll just have to match the ones in Grid Editor to the ones in OBS).

The audio mutes are simple keyboard messages nested inside if functions.

\n ","config":{"name":"BU16-Stream controller for OBS","description":"1st column=scenes switch\n2nd and 3rd column=sources toggle\n4th row=audio mutes","type":"BU16","isGridProfile":true,"version":{"major":1,"minor":2,"patch":9},"configs":[{"controlElementNumber":0,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"6","config":""}]},{"controlElementNumber":1,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"6","config":""}]},{"controlElementNumber":2,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"6","config":""}]},{"controlElementNumber":3,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"6","config":""}]},{"controlElementNumber":4,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"6","config":""}]},{"controlElementNumber":5,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"6","config":""}]},{"controlElementNumber":6,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"6","config":""}]},{"controlElementNumber":7,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"6","config":""}]},{"controlElementNumber":8,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"6","config":""}]},{"controlElementNumber":9,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"6","config":""}]},{"controlElementNumber":10,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"6","config":""}]},{"controlElementNumber":11,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"6","config":""}]},{"controlElementNumber":12,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"6","config":""}]},{"controlElementNumber":13,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"6","config":""}]},{"controlElementNumber":14,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"6","config":""}]},{"controlElementNumber":15,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"6","config":""}]},{"controlElementNumber":255,"events":[{"event":"0","config":""},{"event":"4","config":""},{"event":"5","config":""},{"event":"6","config":""}]}]}}]},{"name":"Step Sequencer I.","slug":"step-sequencer","description":"Change pitch and toggle notes on/off with this EN16 step sequencer.","readme":"","author":"intechstudio","version":"1.2.12","type":"EN16","configs":[{"name":"Page 0","description":"\n

Added Functionality

This profile lets the EN16 behave as an 8-step MIDI sequencer with an internal clock controlling tempo, note on/off setting and pitch change control for each note as well.

Using it

The LEDs of the knobs from 0-7 (the top two rows) will show the sequencer playing, each one of the knobs representing a note in the sequence.

Turning the knobs will change the pitch of the note sent. The MIDI messages being sent out are configured under the 'encoder' event of each corresponding knob.

The top two rows of encoders will mute the corresponding notes when pressed once and unmute them when pressed again. This behavior can be changed under the 'button' event of each encoder.

Encoder 15 is controlling the tempo of the sequence. By pressing it down it can start and stop the whole sequence by starting or stopping the ongoing global 'timer' event. This behavior can be changed under the 'button' event of Encoder 15.

How does it work?

The configuration is mainly based on custom Code Blocks under the System Events tab. Specifically, under System Events/Timer you will find the code for the internal clock of this sequencer (the variables for initializing these are found under the 'init' tab).

This clock is counting down constantly and sending out the next of the 8 notes on each 'tick'.

\n ","config":{"name":"EN16-Sequencer","description":"","type":"EN16","isGridProfile":true,"version":{"major":1,"minor":2,"patch":7},"configs":[{"controlElementNumber":0,"events":[{"event":"0","config":""},{"event":"3","config":" 0 then--[[@glc]] glc(num,1,0,255,0,0)--[[@el]] else--[[@glc]] glc(num,1,0,0,255,0)--[[@en]] end ?>"},{"event":"2","config":""},{"event":"6","config":""}]},{"controlElementNumber":1,"events":[{"event":"0","config":""},{"event":"3","config":" 0 then--[[@glc]] glc(num,1,0,255,0,0)--[[@el]] else--[[@glc]] glc(num,1,0,0,255,0)--[[@en]] end ?>"},{"event":"2","config":""},{"event":"6","config":""}]},{"controlElementNumber":2,"events":[{"event":"0","config":""},{"event":"3","config":" 0 then--[[@glc]] glc(num,1,0,255,0,0)--[[@el]] else--[[@glc]] glc(num,1,0,0,255,0)--[[@en]] end ?>"},{"event":"2","config":""},{"event":"6","config":""}]},{"controlElementNumber":3,"events":[{"event":"0","config":""},{"event":"3","config":" 0 then--[[@glc]] glc(num,1,0,255,0,0)--[[@el]] else--[[@glc]] glc(num,1,0,0,255,0)--[[@en]] end ?>"},{"event":"2","config":""},{"event":"6","config":""}]},{"controlElementNumber":4,"events":[{"event":"0","config":""},{"event":"3","config":" 0 then--[[@glc]] glc(num,1,0,255,0,0)--[[@el]] else--[[@glc]] glc(num,1,0,0,255,0)--[[@en]] end ?>"},{"event":"2","config":""},{"event":"6","config":""}]},{"controlElementNumber":5,"events":[{"event":"0","config":""},{"event":"3","config":" 0 then--[[@glc]] glc(num,1,0,255,0,0)--[[@el]] else--[[@glc]] glc(num,1,0,0,255,0)--[[@en]] end ?>"},{"event":"2","config":""},{"event":"6","config":""}]},{"controlElementNumber":6,"events":[{"event":"0","config":""},{"event":"3","config":" 0 then--[[@glc]] glc(num,1,0,255,0,0)--[[@el]] else--[[@glc]] glc(num,1,0,0,255,0)--[[@en]] end ?>"},{"event":"2","config":""},{"event":"6","config":""}]},{"controlElementNumber":7,"events":[{"event":"0","config":""},{"event":"3","config":" 0 then--[[@glc]] glc(num,1,0,255,0,0)--[[@el]] else--[[@glc]] glc(num,1,0,0,255,0)--[[@en]] end ?>"},{"event":"2","config":""},{"event":"6","config":""}]},{"controlElementNumber":8,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"2","config":""},{"event":"6","config":""}]},{"controlElementNumber":9,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"2","config":""},{"event":"6","config":""}]},{"controlElementNumber":10,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"2","config":""},{"event":"6","config":""}]},{"controlElementNumber":11,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"2","config":""},{"event":"6","config":""}]},{"controlElementNumber":12,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"2","config":""},{"event":"6","config":""}]},{"controlElementNumber":13,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"2","config":""},{"event":"6","config":""}]},{"controlElementNumber":14,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"2","config":""},{"event":"6","config":""}]},{"controlElementNumber":15,"events":[{"event":"0","config":""},{"event":"3","config":"0 then gtt(16,1)else gtp(16)gms(4,144,lastnote,0)glp(counter//2,2,0)counter=-1 end ?>"},{"event":"2","config":""},{"event":"6","config":""}]},{"controlElementNumber":255,"events":[{"event":"0","config":""},{"event":"4","config":""},{"event":"5","config":""},{"event":"6","config":"0 then gms(4,144,lastnote,127)end;print(lastnote)else gms(4,144,lastnote,0)end ?>"}]}]}}]},{"name":"Page Shifter","slug":"page-shifter","description":"The side utility button reconfigured for channel switching.","readme":"","author":"intechstudio","version":"1.2.12","type":"EN16","configs":[{"name":"Page 0","description":"\n

Added Functionality

This configuration profile lets the EN16 shift between the 16 MIDI channels easily using the utility button on the side of the module.

Attention!

Using this profile you lose the ability to switch between Pages using the utility button.

Using it

Each of the encoders are set to work in Relative mode, utilizing velocity as well. When shifting between MIDI channels using the utility button; one of the LEDs will shine brighter than the other ones for a couple of seconds. This LED alludes to the MIDI channel number.

Using this profile you can have 256 parameters controlled with just one controller.

Relative mode is used so all values stay the same when switching between channels, so you can tweak in peace.

How does it work?

The configuration uses a global shift variable, this does the heavy lifting in this profile. The shift variable changes when the side utility button is pressed. The shift variable modifies the MIDI channel, all encoders send their control changes out on. This way you can have 16 faux "Pages" in comparison to the real 4 Pages found on the Grid modular controllers.

\n ","config":{"name":"EN16 shifted pages relative","description":"","type":"EN16","isGridProfile":true,"version":{"major":1,"minor":2,"patch":8},"configs":[{"controlElementNumber":0,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"2","config":"64 then--[[@cb]] glc(num,2,255,50,100)--[[@el]] else--[[@cb]] glc(num,2,50,255,100)--[[@en]] end ?>"},{"event":"6","config":""}]},{"controlElementNumber":1,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"2","config":"64 then--[[@cb]] glc(num,2,255,50,100)--[[@el]] else--[[@cb]] glc(num,2,50,255,100)--[[@en]] end ?>"},{"event":"6","config":""}]},{"controlElementNumber":2,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"2","config":"64 then--[[@cb]] glc(num,2,255,50,100)--[[@el]] else--[[@cb]] glc(num,2,50,255,100)--[[@en]] end ?>"},{"event":"6","config":""}]},{"controlElementNumber":3,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"2","config":"64 then--[[@cb]] glc(num,2,255,50,100)--[[@el]] else--[[@cb]] glc(num,2,50,255,100)--[[@en]] end ?>"},{"event":"6","config":""}]},{"controlElementNumber":4,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"2","config":"64 then--[[@cb]] glc(num,2,255,50,100)--[[@el]] else--[[@cb]] glc(num,2,50,255,100)--[[@en]] end ?>"},{"event":"6","config":""}]},{"controlElementNumber":5,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"2","config":"64 then--[[@cb]] glc(num,2,255,50,100)--[[@el]] else--[[@cb]] glc(num,2,50,255,100)--[[@en]] end ?>"},{"event":"6","config":""}]},{"controlElementNumber":6,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"2","config":"64 then--[[@cb]] glc(num,2,255,50,100)--[[@el]] else--[[@cb]] glc(num,2,50,255,100)--[[@en]] end ?>"},{"event":"6","config":""}]},{"controlElementNumber":7,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"2","config":"64 then--[[@cb]] glc(num,2,255,50,100)--[[@el]] else--[[@cb]] glc(num,2,50,255,100)--[[@en]] end ?>"},{"event":"6","config":""}]},{"controlElementNumber":8,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"2","config":"64 then--[[@cb]] glc(num,2,255,50,100)--[[@el]] else--[[@cb]] glc(num,2,50,255,100)--[[@en]] end ?>"},{"event":"6","config":""}]},{"controlElementNumber":9,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"2","config":"64 then--[[@cb]] glc(num,2,255,50,100)--[[@el]] else--[[@cb]] glc(num,2,50,255,100)--[[@en]] end ?>"},{"event":"6","config":""}]},{"controlElementNumber":10,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"2","config":"64 then--[[@cb]] glc(num,2,255,50,100)--[[@el]] else--[[@cb]] glc(num,2,50,255,100)--[[@en]] end ?>"},{"event":"6","config":""}]},{"controlElementNumber":11,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"2","config":"64 then--[[@cb]] glc(num,2,255,50,100)--[[@el]] else--[[@cb]] glc(num,2,50,255,100)--[[@en]] end ?>"},{"event":"6","config":""}]},{"controlElementNumber":12,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"2","config":"64 then--[[@cb]] glc(num,2,255,50,100)--[[@el]] else--[[@cb]] glc(num,2,50,255,100)--[[@en]] end ?>"},{"event":"6","config":""}]},{"controlElementNumber":13,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"2","config":"64 then--[[@cb]] glc(num,2,255,50,100)--[[@el]] else--[[@cb]] glc(num,2,50,255,100)--[[@en]] end ?>"},{"event":"6","config":""}]},{"controlElementNumber":14,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"2","config":"64 then--[[@cb]] glc(num,2,255,50,100)--[[@el]] else--[[@cb]] glc(num,2,50,255,100)--[[@en]] end ?>"},{"event":"6","config":""}]},{"controlElementNumber":15,"events":[{"event":"0","config":""},{"event":"3","config":""},{"event":"2","config":"64 then--[[@cb]] glc(num,2,255,50,100)--[[@el]] else--[[@cb]] glc(num,2,50,255,100)--[[@en]] end ?>"},{"event":"6","config":""}]},{"controlElementNumber":255,"events":[{"event":"0","config":""},{"event":"4","config":""},{"event":"5","config":""},{"event":"6","config":""}]}]}}]},{"name":"Basic Sequencer","slug":"basic-sequencer","description":"Simple PO16 MIDI sequencer example with velocity change.","readme":"","author":"intechstudio","version":"1.2.12","type":"PO16","configs":[{"name":"","description":"\n

Added Functionality

This profile lets the PO16 behave as an 8-step MIDI sequencer with an internal clock controlling tempo and pitch change control for each note as well.

Knobs from 0-7 (the top two rows) will show the active sequencer. Turning the knobs will change the pitch of the note sent. The MIDI messages being sent out are configured under the 'potmeter' event of each corresponding knob.

Knob 15 is controlling the tempo of the sequence.

How does it work?

This clock is counting down constantly and sending out the next of the 8 notes on each 'tick'.

,\n ","config":{"name":"PO16-Sequencer","description":"","type":"PO16","isGridProfile":true,"version":{"major":1,"minor":2,"patch":5},"configs":[{"controlElementNumber":0,"events":[{"event":"0","config":""},{"event":"1","config":""},{"event":"6","config":""}]},{"controlElementNumber":1,"events":[{"event":"0","config":""},{"event":"1","config":""},{"event":"6","config":""}]},{"controlElementNumber":2,"events":[{"event":"0","config":""},{"event":"1","config":""},{"event":"6","config":""}]},{"controlElementNumber":3,"events":[{"event":"0","config":""},{"event":"1","config":""},{"event":"6","config":""}]},{"controlElementNumber":4,"events":[{"event":"0","config":""},{"event":"1","config":""},{"event":"6","config":""}]},{"controlElementNumber":5,"events":[{"event":"0","config":""},{"event":"1","config":""},{"event":"6","config":""}]},{"controlElementNumber":6,"events":[{"event":"0","config":""},{"event":"1","config":""},{"event":"6","config":""}]},{"controlElementNumber":7,"events":[{"event":"0","config":""},{"event":"1","config":""},{"event":"6","config":""}]},{"controlElementNumber":8,"events":[{"event":"0","config":""},{"event":"1","config":""},{"event":"6","config":""}]},{"controlElementNumber":9,"events":[{"event":"0","config":""},{"event":"1","config":""},{"event":"6","config":""}]},{"controlElementNumber":10,"events":[{"event":"0","config":""},{"event":"1","config":""},{"event":"6","config":""}]},{"controlElementNumber":11,"events":[{"event":"0","config":""},{"event":"1","config":""},{"event":"6","config":""}]},{"controlElementNumber":12,"events":[{"event":"0","config":""},{"event":"1","config":""},{"event":"6","config":""}]},{"controlElementNumber":13,"events":[{"event":"0","config":""},{"event":"1","config":""},{"event":"6","config":""}]},{"controlElementNumber":14,"events":[{"event":"0","config":""},{"event":"1","config":""},{"event":"6","config":""}]},{"controlElementNumber":15,"events":[{"event":"0","config":""},{"event":"1","config":""},{"event":"6","config":""}]},{"controlElementNumber":255,"events":[{"event":"0","config":""},{"event":"4","config":""},{"event":"5","config":""},{"event":"6","config":""}]}]}}]}]